Hand Remote Pendant, Shampaine 5100B, Preowned

Primary Control Pendant:
• Hand pendant actuated floor locks
• Battery strength indicator
• Articulation switches (Patient Positioning)
• Return to Level
• Patient Orientation
• START/STOP

Patient Position Functions Keys are as follows:
• BACK UP/BACK DOWN raises the back section 90°
above or lowers it 30° below horizontal.
Note: When the back section is raised above 25°,
the KIDNEY UP function will be disabled.
• TABLE UP/TABLE DOWN elevates/descends the
entire table top to any position from 28'' to 43'' (711 to 1092mm) above the floor.
• LEG UP/LEG DOWN raises the leg section 70° above or lowers it
95° below horizontal.
• TRENDELENBURG/REVERSE TRENDELENBURG tilts the entire
table top about the transverse axis, positioning the head of the
table 25° below or above horizontal.
• SLIDE FORWARD/SLIDE REVERSE slides the table top longitudinally
8'' (203mm).
• TILT LEFT/TILT RIGHT tilts the entire table top laterally up to 18° left
or right.
• KIDNEY UP/KIDNEY DOWN raises the kidney elevator 2-1/2''
(64mm) above the table surface or retracts it.
Note: A built-in safety feature limits the back section from being
raised more than 25° while the kidney elevator is up.
• FLEX/REFLEX lowers the back section with Reverse Trendelenburg
to form an inverted vee (jackknife) of 150° and/or raises the
back section with Trendelenburg to form a vee of 90°.
• LEVEL brings the table top to a level position in the correct anatomical
sequence (to prevent any undue trauma to the patient).
• NORMAL/REVERSE table orientation re-orients the hand pendant
so that the function keys will operate the table sections coincidental
with the patient’s position on the table. Visual confirmation is
provided on the hand pendant by illuminating the manual foot
pump indicator at the base of the table on the table diagram. In the
NORMAL orientation, the manual foot pump indicator will be green
and located under the patient’s head. In the REVERSE orientation
(used when the patient is reversed on the table), the manual foot
pump indicator will be yellow and located under the patient’s feet
on the table diagram. This visual indication coincides with the actual
location of the manual foot pump on the base of the table, providing
an easy reference for the operator to ensure proper table
orientation.